Каталог продукции:

IFM EFECTOR U60126 2\" Type 316 stainless steel smooth-band worm drive clamp for mounting strap-on surface mount RTD.
IFM EFECTOR U60127 3\" Type 316 stainless steel smooth-band worm drive clamp for mounting strap-on surface mount RTD.
IFM EFECTOR U60128 4\" Type 316 SS smooth-band worm drive clamp for mounting strap-on surface mount RTD.
IFM EFECTOR U60129 6\" Type 316 SS smooth-band worm drive clamp for mounting strap-on surface mount RTD.
IFM EFECTOR U60130 Sensor Wrench, 17mm opening on narrow end, 24mm opening on wide end
IFM EFECTOR U60131 Sensor Wrench, 24mm opening on narrow end, 17mm opening on wide end
IFM EFECTOR U60132 U-Bolt, Type 316 stainless steel, 1\" pipe.
IFM EFECTOR U60133 Fiberglass sleeving, -60C to 648C, 5.28mm inside OD.
IFM EFECTOR U60134 Capacity sensor, 18mm threaded plastic body, 3 wire DC PNP normally open output, 8mm nonflush range, 4\" pigtail with micro DC connector.
IFM EFECTOR U60135 Capacity sensor, 18mm threaded plastic body, 3 wire DC PNP normally open output, 8mm nonflush range, 4\" pigtail with micro DC connector.
IFM EFECTOR U60136 NON-CANCELLABLE NON-RETURNABLE Can be used with PM or PL style pressure transmitters only.
IFM EFECTOR U60137 Temperature probe, Type 316 stainless steel, 15 ft. of cable with removable 4 pin micro DC field wireable.
IFM EFECTOR U60138 MGS202 with weather pak assembly, 10\" cable length
IFM EFECTOR U60139 4-wire micro DC straight connector, 12\" TPE jacket, 22 AWG conductors, tinned.
IFM EFECTOR U60140 3-wire pico connector/AMP connector assembly, 2M, black PUR cable.
IFM EFECTOR U60141 Insertion depth gauge for the SI5xxx flow sensors.
IFM EFECTOR U60142 RTD, Type 316 stainless steel, pipe clamp mounting, 1M cable with micro DC connector with fiberglass sleeving on the cable and heat shrink on both ends.
IFM EFECTOR U60144 Sensor Wrench, 17mm opening on narrow end, 24mm opening on wide end. For use with M5 & M8 sensors.
IFM EFECTOR U60145 Sensor Wrench, 17mm opening on narrow end, 24mm opening on wide end. For use with M5 & M8 sensors.
IFM EFECTOR U60146 3-wire micro DC female straight connector to weather pack connector, 46\" length.
IFM EFECTOR U60148 Male M12 D-Coded Ethernet field attachable connector.
IFM EFECTOR U70205 NON-CANCELLABLE NON-RETURNABLE
IFM EFECTOR U71000 AS-i master, dual backplane type for Allen Bradley SLC, 5/02 through 5/05 series plc.
IFM EFECTOR U71002 AS-i gray flat cable
IFM EFECTOR U71003 Backplane Master, Allen-Bradley Compact and Micro Logix 1500 PLC Platforms, Single Master.
IFM EFECTOR U71005 Backplane Master, Allen-Bradley Controllogix PLC Platforms, Dual Master.
IFM EFECTOR U71006 NON-CANCELLABLE NON-RETURNABLE
IFM EFECTOR U71007 Accessory, flat cable splitter, insulation displacement to M12 male connector, 0.75M cable.
IFM EFECTOR U71008 NON-CANCELLABLE NON-RETURNABLE
IFM EFECTOR U71009 NON-CANCELLABLE NON-RETURNABLE
IFM EFECTOR U71010 Bracket - Uni- Strut connection round sensor housing valves, quick mounting adapter.
IFM EFECTOR U71011 Bracket - Uni- Strut connection for MAC solenoid valves, quick mounting adapter.
IFM EFECTOR U71012 Bracket - Uni- Strut connection for MAC solenoid valves, quick mounting adapter.
IFM EFECTOR U80008 RTD temperature probe, 316 stainless steel, mounting accessory required, 10 mm diameter, 300mm length with 5m cable and molded 4 pin micro DC connector.
IFM EFECTOR U80660 NON-CANCELLABLE NON-RETURNABLE
IFM EFECTOR U80950 Wiring kit that reduces cables requried by sensor and solenoid. Used on an actuated valve. Kit includes patch cord to sensor, patch cord to solenoid, splitter tee connector, 2 mounting clamps for spli
IFM EFECTOR U80951
IFM EFECTOR U80952 NON CANCELLABLE NON RETURNABLE
IFM EFECTOR U90002 Magnet and screw for temporary mounting of Octavis
IFM EFECTOR U90004 Octavis Startup Kit.
IFM EFECTOR U90005 Octavis Startup Kit INCLUDES:....octavis brochure (B10106)..octavis installation coupon (B30204)..octavis software setup guide (B30804)..M12 socket (E10967)..pulse generator (E30082)..octavis serial c
IFM EFECTOR U90006 VE1101 Octavis Startup Kit.
IFM EFECTOR U90007 HAAS Vibration Analyzer Kit.
IFM EFECTOR U90008 HAAS Vibration Analyzer Kit w/European Power Supply.
IFM EFECTOR U90009 Octavis Vibration Analyzer Kit.
IFM EFECTOR U90012 VE1102 Octavis Startup Kit.
IFM EFECTOR U90013 Octavis Kit for Trane beta installation. Kit contains (9) VE1001 sensors, (1) VE1102 sensor, (10) E10955 cables, (1) VES001 software CD, (1) E30098 setup cable, (10) F90022 mounting pads, (2) F90037 a
IFM EFECTOR U90015 NON-CANCELLABLE NON-RETURNABLE
IFM EFECTOR U90016 Octavis vibration analyzer kit, IP69K W/programming extension
IFM EFECTOR U90017 VE1103 Octavis Startup Kit
IFM EFECTOR U90018 NON-CANCELLABLE NON-RETURNABLE
IFM EFECTOR U90019 NON-CANCELLABLE NON-RETURNABLE
IFM EFECTOR U90020 VE1103 Octavis Vibration Analyzer Kit.
IFM EFECTOR U90099 NON-CANCELLABLE NON-RETURNABLE
IFM EFECTOR U90100 Conduit adapter, nickle plated brass, M16 to 1/2\" NPT thread.
IFM EFECTOR U90101 Adapter, conduit, M16-1/2\"NPT, black plastic.
IFM EFECTOR U90102 Conduit adapter, M20 - 1/2\" NPT threat, plastic, used for adapting terminal chamber switches with M20 threads to conduit.
IFM EFECTOR U90103 Conduit adapter, M20 - 1/2\" NPT threat, Nickel, used for adapting terminal chamber switches with M20 threads to conduit
IFM EFECTOR U90301 Low flow adapter, G1/4 BSPP process connection, 303 stainless steel.
IFM EFECTOR U90600 NON-CANCELLABLE NON-RETURNABLE
IFM EFECTOR UT0009 ? 10 mm - ?\" NPT....Thermowell for temperature sensors
IFM EFECTOR TA3130 Temperature transmitter, 316 stainless steel wetted parts, 0...140C/32...284F measuring range, 4 - 20mA analog output, 4 pin micro DC connector, G1/4 BSPP connection, 1.8\" (46mm) probe length.
IFM EFECTOR TA3231 Temperature transmitter, 316 stainless steel wetted parts, 0...140C/32...284F measuring range, 4 - 20mA analog output, 4 pin micro DC connector, 6mm probe diameter, 4.8\" (123mm) probe length.
IFM EFECTOR TA3430 Temperature transmitter, 316 stainless steel, 0...140C/32...284F measuring range, 4 - 20mA analog output, 4 pin micro DC connector, mounting adapters required, 120mm probe length (useable length deter
IFM EFECTOR TA3431 Temperature transmitter, 316 stainless steel, -10...150C/14...302F measuring range, 4 - 20mA analog output, 4 pin micro DC connector, mounting adapters required, 120mm probe length (useable length det
IFM EFECTOR TAA431 Temperature transmitter for AS-i, Type 316 stainless steel, -10...150C/ 14...302F measuring range, version 2.1 analog output, 4 pin micro DC connector, mounting adapters required.
IFM EFECTOR TAD161 100mm probe length, analog signal scaleable via seperate programming device, 316 stainless steel, 4-pin micro DC connector.
IFM EFECTOR TAD171 96mm probe length, analog signal scaleable via seperate programming device, 316 stainless steel, 4-pin micro DC connector.
IFM EFECTOR TAD181 Temperature transmitter..with diagnostic output..TAD....Process connection:..G1 / Aseptoflex Vario....Redundant sensor elements..with backup function..Communication interface: IO-Link 1.0..(COM1 slave
IFM EFECTOR TAD961 40mm probe length, analog signal scaleable via seperate programming device, 316 stainless steel, 4-pin micro DC connector.
IFM EFECTOR TH0008 DESCRIPTION - 300mm probe, 316 stainless steel, 5m cable with 4 pin micro DC connector.
IFM EFECTOR TM0061 RTD temperature probe, 316 stainless steel, mounting accessory required, 10mm diameter, 50mm nominal length
IFM EFECTOR TM1061 RTD temperature probe, 316 stainless steel, mounting accessory required, 10mm diameter, 100mm nominal length
IFM EFECTOR TM9061 RTD temperature probe, 316 stainless steel, mounting accessory required, 10mm diameter, 30mm nominal length
IFM EFECTOR TN2530 Electronic temperature sensor..TN Compact type for adapter..Quick disconnect..Process connection:..internal thread M18 x 1.5 for adapter gold-plated contacts..Switching output, analog output 4...20 mA
IFM EFECTOR TN2531 Electronic temperature sensor..TN....Compact type for adapter..Quick disconnect..Process connection:..internal thread M18 x 1.5 for adapter....Communication interface: IO-Link 1.0..(COM2 slave, 38.4 k
IFM EFECTOR TN2930 Temperature switch/analog-transmitter. Use with E40099 and pipe-saddle for surface-temperature monitoring.
IFM EFECTOR TR2432 Evaluation unit for temperature sensors..TR....Process connection:..G? A....gold-plated contacts......Switching output, analog output 4...20 mA or 0...10 V..4-digit alphanumeric display..Measuring ran
IFM EFECTOR TR7430 Temperature monitor, numeric display, 2 PNP outputs, -40 to 302F range, RTD required.
IFM EFECTOR TR8430 NON-CANCELLABLE NON-RETURNABLE
IFM EFECTOR TR8500 NON-CANCELLABLE NON-RETURNABLE
IFM EFECTOR TR8501 NON-CANCELLABLE NON-RETURNABLE
IFM EFECTOR TR8503 NON-CANCELLABLE NON-RETURNABLE
IFM EFECTOR TR8504 NON-CANCELLABLE NON-RETURNABLE
IFM EFECTOR TS2051 RTD temperature probe, 316 stainless steel, mounting accessory required, 10mm diameter, 47mm length with 2m cable.
IFM EFECTOR TS2056 RTD temperature probe, 316 stainless steel, mounting accessory requrired, 10mm diameter, 45mm length with 2m PTFE cable, -50 to 250C temperature range.
IFM EFECTOR TS2151 RTD temperature probe, 316 stainless steel, mounting accessory required, 8mm diameter, 50mm length with 2m cable.
IFM EFECTOR TS2229 RTD temperature probe, brass, surface mount, 6mm diameter mounting hole, 2m cable.
IFM EFECTOR TS2256 High temperature RTD probe, 320 stainless steel, mounting accessory required, 6mm diameter, 50mm length with 2M teflon cable, 4 pin micro DC connector, measuring range -58... 482F.
IFM EFECTOR TS2759 NON-CANCELLABLE NON-RETURNABLE
IFM EFECTOR TS5051 RTD temperature probe, 316 stainless steel, mounting accessory required, 10mm diameter, 47mm length with 5m cable
IFM EFECTOR TS5151 RTD temperature probe, 316 stainless steel, mounting accessory required, 8mm diameter, 50mm length with 5m cable.
IFM EFECTOR TT0061 RTD temperature probe, 316 stainless steel, mounting accessory required, 10mm diameter, 50mm length.
IFM EFECTOR TT1050 RTD temperature probe, 316 stainless steel, mounting accessory required, 10mm diameter, 100mm length.
IFM EFECTOR TT1061 RTD temperature probe, 316 stainless steel, mounting accessory required, 10mm diameter, 100mm length.
IFM EFECTOR TT1081 ? 10 mm..Temperature sensor for connection to evaluation units..Quick disconnect....Connection to control monitor TP / TR..Measuring range..-40...150 ?C / -40...302 ?F
IFM EFECTOR TT1250 RTD TEMPERATURE PROBE, 316 STAINLESS STEEL, MOUNTING ACCESSORY REQUIRED, 6MM DIAMETER, 100mm LENGTH.
IFM EFECTOR TT2050 RTD temperature probe, 316 stainless steel, mounting accessory required, 10mm diameter, 200mm length.
IFM EFECTOR TT2150 NON-CANCELLABLE NON-RETURNABLE
IFM EFECTOR TT2250 RTD TEMPERATURE PROBE, 316 STAINLESS STEEL, MOUNTING ACCESSORY REQUIRED, 6MM DIAMETER, 200mm LENGTH.
IFM EFECTOR TT3050 RTD temperature probe, 316 stainless steel, mounting accessory required, 10mm diameter, 300mm length.
IFM EFECTOR TT3250 RTD temperature probe, 316 stainless steel, mounting accessory required, 6mm diameter, 300mm length.
IFM EFECTOR TT5050 RTD temperature probe, 316 stainless steel, mounting accessory required, 10mm diameter, 500mm length.