Каталог продукции:

ESD AMC-ADIO24
ESD AMC-ADIO-Adapter
ESD AMC-CAN4 ESD AMC-CAN4 Expansion Module - Cost effective: 4 channels onboard, Wide software support: drivers for Windows, Linux, QNX and other operating systems
ESD C.2017.02 ESD C.2017.02 I/O Controller - 1x DeviceNet, Software drivers available for many operating systems, CANopen master-slave object license available
ESD C.2017.04
ESD C.2020.04 ESD C.2020.04 I/O Controller - 2x CAN, ISO11898, Microcontroller 68331, Also available for DeviceNet (DN-PCI/331)
ESD C.2021.04 ESD C.2021.04 I/O Controller - 2x CAN 2.0A/B, ISO11898, The module CAN-PCI/200 is a PC board designed for the PCI bus.
ESD C.2036.02 ESD C.2036.02 I/O Controller - 1x CAN 2.0A/B, ISO11898, CAN interfaces electrically isolated, designed acc. to ISO 11898, bit rate up to 1 Mbit/s
ESD C.2036.04
ESD CAN-CBM-Bridge/2
ESD CAN-CBM-Bridge/2-ME gh
ESD CAN-CBM-COM1
ESD CAN-CBM-DP ESD CAN-CBM-DP I/O Controller - DP-CAN gateway, layer 2, CAN 2.0A (11-bit CAN-ID), GSD-file, 11-bit CAN-ID or 29-bit CAN-ID
ESD CAN-CBM-DP-2.0B ESD CAN-CBM-DP-2.0B I/O Controller DP-CAN gateway, layer 2, CAN 2.0B (29-bit CAN-ID) GSD-file, CAN-PLC link, e.g. to SIEMENS S7-300 or S7-400
ESD CAN-CBM-SI01 ESD CAN-CBM-SIO1 I/O Controller - 1x CAN 2.0A/B at 1 x RS-232, Independent microcontroller 68331 for protocol realization
ESD CAN-CBM-SIO4 ESD CAN-CBM-SIO4 I/O Controller - 1x CAN 2.0A/B at (4+1) x RS-232, RS-232, -422, -485 or TTY to CAN, Compact top-hat rail module
ESD CAN-CBX-AI420 ESD CAN-CBX-AI420 I/O Controller - 4 analog inputs 20 bit, In-Rail-Bus CANopen, Programmable input range
ESD CAN-CBX-AI814 ESD CAN-CBX-AI814 I/O Controller - 8 analog inputs 14 bit, CAN/CANopen interface electrically isolated and designed acc. to ISO 11898
ESD CAN-CBX-AO412 ESD CAN-CBX-AO412 I/O Controller - 4 analog outputs 12 bit, Power supply 24VDC, 2-wire connection, Analog outputs electrically isolated
ESD CAN-CBX-CPU5201 ESD CAN-CBX-CPU5201 I/O Controller - Powerful Realtime Controller in a Smart Format, PowerPCTM MPC5121with FPU, 400 MHz
ESD CAN-CBX-CPU5201/ DP ESD CAN-CBX-CPU5201/ DP I/O Controller - Linux, Profibus-DP-Slave Option, 0.5 GB SDRAM, 1 GB NAND-Flash, 2x CAN, 1x USB 2.0 Full-Speed Host
ESD CAN-CBX-DIO8
ESD CAN-Control-I/O
ESD CAN-DP
ESD CAN-ISA/200 ESD CAN-ISA/200 I/O Controller - 1x CAN, ISO11898, 125 kbit/s, Low cost PC to CAN interface
ESD CAN-ISA/331-1 ESD CAN-ISA/331-1 I/O Controller - 1x CAN, ISO 11898, Interface from PC to one or two independent CAN net
ESD CAN-ISA/331-2 ESD CAN-ISA/331-2 I/O Controller - 2x CAN, ISO 11898, Interface from PC to one or two independent CAN net, Available for CANopen & DeviceNet
ESD CANopen-DP ESD CANopen-DP I/O Controller - PROFIBUS-DP-CANopen gateway, GSD-file, Fast and reliable linking PROFIBUS-DP and CANopen networks with data buffering
ESD CAN-PC104/200-1 ESD CAN-PC104/200-1 I/O Controller - 1x CAN, 3 controllers, CAN interfaces electrically isolated, designed acc. to ISO 11898, bit rate up to 1 Mbit/s
ESD CAN-PC104/200I ESD CAN-PC104/200I I/O Controller - 1x CAN, only Intel 82527, Easy to use for evaluation and starter kits
ESD CAN-PC104/200-P ESD CAN-PC104/200-P I/O Controller - 1x CAN, only Phillips SJA1000, PC/104 CAN interface, Suitable for CANOpen and J1939.
ESD CAN-PC104/200S
ESD CAN-PC104/331-1 ESD CAN-PC104/331-1 Intelligent PC104-CAN-Interface - 16-bits-plug-in board
ESD CAN-PC104/331-2
ESD CAN-PCI/200-1
ESD CAN-PCI/331-1 ESD C.2020.02 I/O Controller - 1x CAN, ISO11898 Software examples for DOS and Windows 3.11 in source code
ESD CAN-PCI/405-2
ESD CAN-PCI/405-4
ESD CAN-PCI/405-B4
ESD CAN-PCIe/200-1 ESD CAN-PCIe/200-1 I/O Controller - 1x CAN, ISO11898-1, -2, CAN interfaces electrically isolated and designed according to ISO 11898-2
ESD CAN-PCIe/200-2
ESD CAN-Repeater-I
ESD CAN-Repeater-I Opto
ESD CAN-Repeater-Y ESD CAN-Repeater-Y I/O Controller - 3x CAN, Y Repeater forms branch between one and two CAN Networks, Compact hat rail module.
ESD CAN-Repeater-Y Opto
ESD CAN-STEPCON-1H ESD CAN-STEPCON-1H I/O Controller - Stepper motor controller, CANo­pen DS-402, CiA DS-402 implementation, 3 limit switch inputs, Brake output
ESD CAN-USB/2 ESD CAN-USB/2 I/O Controller - USB 2.0, 1x CAN, ISO11898, CAN interface electrically isolated, designed acc. to ISO 11898, bit rate up to 1 Mbit/s
ESD CAN-USB-Micro
ESD CPCI-405
ESD CPCI-405-64
ESD CPCI-405-A ESD CPCI-405-A I/O Controller - IBM PPC405GP, 200 MHz, 32 MB SDRAM, 2 MB Flash, target adapter, 1x CAN interface, ISO11898, 1 Mbit/s, opto-isolated
ESD CPCI-ASIO4 ESD CPCI-ASIO4 I/O Controller - 4 serial interfaces, RS-232, Opto-isolated, Support for Linux, VxWorks, Windows XP and QNX6
ESD CPCI-CAN/200-1B ESD CPCI-CAN/200-1B I/O Controller - 1x CAN, ISO11898, CAN interface opto-isolated, designed acc. to ISO 11898, bit rate up to 1 Mbit/s
ESD CPCI-CAN/200-2B ESD CPCI-CAN/200-2B I/O Controller - 2x CAN, ISO11898, Low cost CompactPCI-CAN interface with 1 or 2 CAN Channels, Suitable for CANopen and J1939
ESD CPCI-CAN/200-2-T
ESD CPCI-CAN/331-1B ESD CPCI-CAN/331-1B I/O Controller - 1x CAN 2.0A/B, ISO11898, Interface from CompactPCI to one or two independent CAN net(s)
ESD CPCI-CAN/331-2B
ESD CPCI-CAN/360-2 ESD CPCI-CAN/360-2 I/O Controller - 2x CAN, 0…50oC, High end microcontroller 68360 for local data management, up to 36 Mbyte DRAM
ESD CPCI-CAN/360-2-T ESD CPCI-CAN/360-2-T I/O Controller - 2x CAN, -40…+85oC, CompactPCI-CAN interface with 2 CAN interfaces, 128 k x 32 Fast SRAM, 1 M x 8 Flash EPROM
ESD CPCI-CAN/400-2 ESD CPCI-CAN/400-2 I/O Controller - 2x CAN, 33/66 MHz CompactPCI interface, ARINC 825 protocol available, 2x CAN ISO 11898
ESD CPCI-CAN/400-4 ESD CPCI-CAN/400-4 I/O Controller - 4x CAN, 1x IRIG-B IRIGB, ARINC 825 protocol available, 33/66 MHz CompactPCI interface
ESD CPCI-CF ESD CPCI-CF I/O Controller - CompactFlash interface only, Access via standard system drivers of VxWorks, Windows NT/2000, Linux and QNX
ESD CPCI-CPU/5200 ESD CPCI-CPU/5200 I/O Controller - PowerPC MPC5200 , 400 MHz 128 MB SDRAM, 32 MB Flash, 10/100BaseT ETHERNET, Low power consumption
ESD CPCI-CPU/750 ESD CPCI-CPU/750 I/O Controller - CompactPCI host CPU, IBM PPC750FX, 733 MHz, 256 MB SDRAM, 64 MB Flash, Suitable for CANopen and J1939
ESD CPCI-CPU/750-Linux ESD CPCI-CPU/750-Linux I/O Controller - Linux BSP/adaption, PowerPC IBM 750FX with up to 1850 DMIPS, Giga ETHERNET 10/100/1000 Base T
ESD CPCI-CPU/750-VxW ESD CPCI-CPU/750-VxW I/O Controler - VxWorks BSP/adaption, CAN interfaces electrically opto-isolated, designed acc. to ISO 11898, 1 Mbit/s
ESD CPCI-DVI ESD CPCI-DVI I/O Controller - Graphic adapter board, Resolution up to 1600x1200x16 bits per pixel, 4 Mbyte on-chip high performance SDRAM memory
ESD CPCI-DVI-VI
ESD CPCI-ETH2
ESD CPCI-ETH2-FX ESD CPCI-ETH2-FX I/O Controller - Dual FibreOptic, Standard ETHERNET driver, The interfaces conform to IEEE802.3
ESD CPCI-ETH2-MX
ESD CPCI-HD ESD CPCI-HD I/O Controller - 10 GB HD drive, CompactFlash interface, CompactFlash card slot in front panel (type I), Single slot 3 HE, 4 TE
ESD CPCI-HD/2 ESD CPCI-HD/2 I/O Controller - CompactFlash interface, 2x SATA interface, HD-drive > 40 GB, CompactFlash hot-plug capable
ESD CPCI-USB-5 ESD CPCI-USB-5 I/O Controller - CPCI USB 2.0 interface with 5x USB 2.0 via front panel,1x USB on-board connector
ESD CPCI-USB-5-CF/SD ESD CPCI-USB-5-CF/SD I/O Controller - as I.2326.01 but with 1x Compact­Flash card slot* and 1x SD memory card slot* on-board
ESD DN-CBM-DP
ESD DN-DP ESD DN-DP I/O Controller - DeviceNet-DP gateway ISO11898-2, GSD-file, Fast and reliable linking Profibus-DP and DeviceNet with data buffering
ESD DN-ISA/331/2 ESD DN-ISA/331/2 I/O Controller - 2x DeviceNet, Interface from PC to one or two independent CAN net, Microcontroller 68331 on board
ESD DN-ISA/331-1 ESD DN-ISA/331-1 I/O Controller - 1x DeviceNet, Interface from PC to one or two independent CAN net, Microcontroller 68331 on board
ESD DN-PCI/331-1
ESD DN-PCI/331-2 ESD DN-PCI/331-2 I/O Controller - 2x DeviceNet, Microcontroller 68331, On-board DeviceNet firmware, master/slave, Suitable for CANOpen and J1939.
ESD ECM-PCIe/8300-DE ESD ECM-PCIe/8300-DE I/O Controller - Dual NIC intelligent EtherCAT-Master PCI Express board, Master API and \'EtherCAT Workbench\' support
ESD ECS-PCIe/1100 ESD ECS-PCIe/1100 I/O Controller - PCI Express board with EtherCAT slave controller ET1100
ESD ECX-DIO8 ESD ECX-DIO8 I/O Controller - EtherCAT - digital I/O-Module with 8 channels, 100BASE-TX EtherCAT interfaces compatible to IEEE 802.3
ESD ECX-PoE-PE
ESD EPPC-405 ESD EPPC-405 I/O Controller - IBM PPC405GP, 200 MHz 16 MB SDRAM, 4 MB Flash, 2x RS-232, 1x CAN, Power supply voltage 24 VDC
ESD EPPC-405-2 ESD EPPC-405-2 I/O Controller - IBM PPC405GP, 200 MHz 16 MB SDRAM, 4 MB Flash, 1x RS-232, 2x CAN, All connectors accessible at the front pane
ESD EPPC-405-DN
ESD EPPC-405-HR ESD EPPC-405-HR I/O Controller - IBM PPC405EP, 133 MHz 32 MB SDRAM, 8 MB Flash, Small top hat rail mounting enclosure
ESD EPPC-405-HR-266 ESD EPPC-405-HR-266 I/O Controller - IBM PPC405EP, 266 MHz 32 MB SDRAM, 8 MB Flash, 10/100BaseT ETHERNET, CoDeSys programming system
ESD EPPC-405-LW ESD EPPC-405-LW I/O Controller - IBM PPC405GP, 200 MHz 16 MB SDRAM, 4 MB Flash, 1x RS-232, 1x CAN, 1x CAN fiber optic interface
ESD EPPC-405-UC
ESD ESD6057-SSAMP ESD Printed Circuit Board
ESD EtherCAN ESD EtherCAN I/O Controller - CAN-ETHERNET-Gateway 2 MB Flash, 16 MB SDRAM, CAN over Ethernet
ESD EtherCAN/2 ESD EtherCAN/2 I/O Controller - CAN-Ethernet-Gateway, 200 MHz ARM-9 microcontroller (MCU), Ethernet interface
ESD EtherCAN/2-S7 ESD EtherCAN/2-S7 I/O Controller - Industrial Ethernet/UDP Gateway, incl. S7-example project with function modules to interface a S7-300/400
ESD EtherCAN-ELLSI ESD EtherCAN-ELLSI I/O Controller - UDP/TCPIP Socket-Interface, CANOpen manager, Hat-rail case
ESD EtherCAN-Modbus-TCP ESD EtherCAN-Modbus-TCP I/O Controller - MODBUS/CAN-Gateway, ETHERNET protocols: TCP/IP, Modbus/TCP, 10/100BaseT ETHERNET
ESD EtherCAN-NT ESD EtherCAN-NT I/O Controller - CAN-ETHERNET gateway bundle w/WinXP/2K & Linux driver, CAN-API, ARM-processor NET+50
ESD LP-2 ESD Power Supply Board
ESD MVME-ADA-FBK16 ESD MVME-ADA-FBK16 I/O Controller - FBK from AUI to MVME-P2 at MVME-TR-AUI/BNC or -TR-ETH/SER4, CENTRONICS interface via 26-pole post connector
ESD MVME-P2
ESD MVME-TR-FBK20 ESD MVME-ADA-FBK16 I/O Controller - FBK serial interfaces from MVME-P2 to MVME-TR-ETH/SER4, Compatible in function to MVME712
ESD PMC-CAN/266-1 ESD PMC-CAN/266-1 I/O Controller - 1x CAN 2.0A/B, ISO11898, CAN interfaces electrically isolated and designed acc. to ISO 11898
ESD PMC-CAN/266-2 ESD PMC-CAN/266-2 I/O Controller - 2x CAN 2.0A/B, ISO11898, Works at 66 MHz PCI and 33 MHz PCI, Software drivers available for many operating systems
ESD PMC-CAN/266-RIO ESD PMC-CAN/266-2 I/O Controller - 2x CAN 2.0A/B, signals with TTL-level via PMC-connector, Powerful PMC-CAN Interface, Bit rate up to 1 Mbit/s
ESD PMC-CAN/331-1 ESD=PMC-CAN/331-1 I/O Controller - 1x CAN, ISO 11898, CAN interfaces electrically isolated, designed acc. to ISO 11898, bit rate up to 1 Mbit/s
ESD PMC-CAN/331-1DN
ESD PMC-CAN/331-2 ESD PMC-CAN/331-2 I/O Controller - 2x CAN, ISO 11898, PMC module with one or two independent CAN nets, Microcontroller 68331 for local data management
ESD PMC-CAN/331-2DN
ESD PMC-CAN/400-4 ESD PMC-CAN/400-4 I/O Controller - 4x CAN, 1x IRIG-B, ARINC 825 firmware, standard cooling, 33/66 MHz PCI interface
ESD PMC-CAN/400-4-CC ESD PMC-CAN/400-4-CC I/O Controller - 4x CAN, 1x IRIG-B, ARINC 825 firmware, conduction cooled, interfaces available at Pn4 with TTL level only
ESD PMC-CPU/405
ESD PMC-CPU/440
ESD PMC-DVI ESD PMC-DVI I/O Controller - Graphics adapter board, DVI-I (digital video interface) connector including RGB-analog
ESD PMC-ETH2/GB-RJ45 ESD PMC-ETH2/GB-RJ45 I/O Controller - PMC target module with 2x Gigabit Ethernet at RJ45, Runs with standard system driver for Ethernet interfaces
ESD UP-7505A-CIO ESD EMPS-8 Board
ESD UP-79003A-SIO ESD I/O Board
ESD UP-80002A-CPU2 ESD CPU Board
ESD UP-82001B-COMB1 ESD Printed Circuit Board
ESD VME-AIO16
ESD VME-AIO16-12
ESD VME-AIO16-12/6
ESD VME-AIO16-6
ESD VME-CAN4
ESD VME-CAN4-1
ESD VME-CAN4-2
ESD VME-CAN4-64 ESD VME-CAN4-64 I/O Controller - CAN layer according to ISO 11898 with 9-pole DSUBs or DeviceNet interface, SDS Smart Distributed System
ESD VME-DAC1612-x
ESD VME-DPIO32 ESD VME-DPIO32 I/O Controller - 32 digital I/Os, PWM, counter, timer, All 32 outputs programmable for pulse width modulation (PWM) or gating control
ESD VME-DVI ESD VME-DVI I/O Controller with IBM PPC 405GP, 200 MHz 32 MB SDRAM, 32 MB Flash, graphics controller
ESD VME-ISER12
ESD VME-PMC-CADDY
ESD VME-PMC-CADDY/2
ESD VME-PMC-CADDY/2-32P2
ESD VME-PMC-CADDY/2-CC
ESD VME-PMC-CADDY/2-T
ESD VME-PMC-CADDY-3.3P1
ESD VME-PMC-CADDY-32P2
ESD VME-PMC-CADDY-T
ESD VME-PMC-CPU/2
ESD VME-PMC-CPU/2-32P
ESD VME-PMC-CPU/2-CC
ESD VME-PMC-CPU/2-CC-32P2
ESD VME-PMC-CPU/2-T ESD VME-PMC-CPU/2-T I/O Controller - Master or slave functionality, 2eVME and 2eSST fast protocol, Slots according to IEEE Std 1386-2001 specified